Stainless Steel 430 Sheets, Plates Specification
Standards : ASTM A240 / ASME SA240
Size : 1/4″ to 4″
Range : 5mm To 150mm
Thickness : 4.0mm – 100mm
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
After manufacturing, our plates are immediately sent to testing section where various tests are conducted to meet the quality of the plates in terms of best services. Our company conducts all these tests-
- Intergranular corrosion test
- Positive material test
- Hardness test
- Tensile test
- Mechanical test
- Chemical test
- Flaring and flattering test
To ensure safe packing, avoid damaging during the last stage of the production. Stainless Steel 430 Sheets/ Plates are packed very carefully.
- Wooden box
- Wooden crates
- Plywood case
These are also covered in thin film of plastics for protection against the corrosion and oxidation.
|SS 430||S43000||1.4016||430||Z 8 C 17||430 S 17||X10 Cr 17||SUS 430||142320||X12Cr17C|
|SS 430||0.120||1.000||0.040||0.030||1.00||16.00-18.00||0.75 max|
|Tensile Strength (MPA)min.||%Yield Strength(MPA)min.||%Elongation(min.)||Hardness (HRB)max.|